Siasponge® Sanding Sponges

/in , ,

SIA LogoSia Sanding Sponges

 

4 ½” X 5 ½” Sponges             $19.95 Box of 20

      • The finishing action of sponges generates a finer finish than conventional coated abrasive products
      • Can be used wet or dry
      • Eliminates finger marks
      • Generates a uniform finish
      • Grit printed on the back of each sponge
      • Easily identify the right product to use
      • Highly conformable, great on contours and edges

Available in: Fine, Extrafine, Superfine and Microfine

 

Lemmer Complete Pressure Pot System

/in ,

Lemmer Pressure Pot System

 

SPECIAL BUY! $435.00 Complete Kit

A-928P HVLP pressure feed spray gun which is designed for use with pressure pots. Low overspray is achieved by converting compressor air to High Volume Low Pressure in the air cap. Spray fan control is adjusted at the top back of gun, horizontal and vertical pattern is controlled at the air cap, and material flow is controlled at the back of the gun. The fluid needle and seat are made of stainless steel. This gun is supplied with a 1.4mm general purpose nozzle for thin materials such as lacquer, stain, and enamels.

 

2.25 gallon heavy duty pressure pot is used for larger painting jobs where either the entire pot is filled or a one gallon can of paint is inserted inside. Easy to clean due to Teflon coated inner tank

Dual air regulators and air gauges are supplied as standard equipment on this pressure pot which allows precise control of product to the gun and precise control of atomizing air. Fluid pressure is regulated to a max of 50 psi. The air setting for the gun is regulated to a max of 100 psi. No tools are required to open the pressure pot, large quick release clamps are easily accessed on top for quick removal of the lid. System comes complete with a 25’ Twin line hose.

 

It’s Back Again This Year!

/in

Joe Spencer

Our Wood Finishing Seminars with recognized wood coatings and application systems expert Joe Spencer

     These seminars will be presented by Joe Spencer, Director for AcromaPro North America. Joe’s career includes senior management roles at Akzo Nobel, Becker Acroma and now AcromaPro. In these interactive three hour seminars Joe will discuss: Creating a well-defined finishing process, Different types of coatings and when to use them and Common finishing problems – causes & solutions as well as a Q&A session.

 Wednesday, May 20th  2:30 – 5:30      Long Lake Inn – Nanaimo

 Thursday, May 21st       2:30 – 5:30      Camosun College   (Lansdowne Campus)– Victoria

 Seminars are free to attend but registration is required to hold a spot for you or your finisher.

Space is limited to 30 participants per seminar on a first reserved basis.

Complimentary refreshments will be available.

 Please call Mike at Columbia Paints & Industrial Supplies

(250) 475-2295 or (800) 606-2295 to register, get parking vouchers and meeting room directions.